3-Com Office Connect ISDN Lan - Can't Access Router

[g***@kevajuice.com]

I am really stuck on this. I am trying configure a video serveylance
system onto the internet. I need to forward port 5700 to IP
192.168.239 in order for it to be accessed via the internet.

My setup is as follows:
-1 3Com Office connect ISDN Lan Modem. It is connected to the
internet with IP address 192.168.1.1
-1 Dlink Router connected to the ISDN Lan Modem. when I do IP config,
it shows the IP as 192.168.1.2
-1 Dell Server plugged into Dlink Router
-1 Micros Workstation Plugged into Dlink Router.
-DVR LAN Video Serveylance System Plugged into Dlink Router.

When I try to access the Dlink by opening Internet Explorer and typing
192.168.1.2. It says the page cannot be displayed. When I try typing
in the WAN IP address, it says "Object Disabled".

When I try to access the 3-Com Office Connect Lan Modem, it allows me
to access the setup page, but there is nothing to forward the ports.

What I my missing, why can't I access the dlink router?

[Phil Partridge]

Post by g***@kevajuice.com
I am really stuck on this. I am trying configure a video serveylance
system onto the internet. I need to forward port 5700 to IP
192.168.239 in order for it to be accessed via the internet.
-1 3Com Office connect ISDN Lan Modem. It is connected to the
internet with IP address 192.168.1.1
-1 Dlink Router connected to the ISDN Lan Modem. when I do IP config,
it shows the IP as 192.168.1.2

This is probably bad wording on your part, but ipconfig gives IP details
of the server/workstation, NOT the router. - Though it can be inferred
from the gateway address.
What model of D-Link do you have?

Post by g***@kevajuice.com
-1 Dell Server plugged into Dlink Router
-1 Micros Workstation Plugged into Dlink Router.
-DVR LAN Video Serveylance System Plugged into Dlink Router.
When I try to access the Dlink by opening Internet Explorer and typing
192.168.1.2. It says the page cannot be displayed. When I try typing
in the WAN IP address, it says "Object Disabled".
When I try to access the 3-Com Office Connect Lan Modem, it allows me
to access the setup page, but there is nothing to forward the ports.
What I my missing, why can't I access the dlink router?

Philip Partridge

[Kenneth P. Stox]

Post by g***@kevajuice.com
I am really stuck on this. I am trying configure a video serveylance
system onto the internet. I need to forward port 5700 to IP
192.168.239 in order for it to be accessed via the internet.

^^^^^^^^^^^

You might want to start with a valid IP address.